Visit
Official Website
EN | ÖÐÎÄ

Dew Point Sensor

Previous 7 / 19 Next


S 220 DEW POINT SENSOR/ dew point transmitter (-100 … 0 ºC)

The CS-iTEC dew point sensor S 220 provides reliable and long term stable dew point monitoring in industrial applications. CS is using a new sensor technology which has superior signals at very low moisture levels thus providing reliable measurements down to –100 ºC.

A stainless steel mesh filter with pore sizes below 30 um protects the sensor from particles. It’s designed for applications where very low moisture levels needs to be detected.

The measured dew point is output through a 4-20 mA signal (3-wire or loop powered). Sensor parameters such as analogue output scaling, physical units, can be easily changed by using CS-iTEC service kit.

Application

Stated accuracy under following conditions:

  • Ambient temperature 23±3°C
  • Process temperature 23±3°C
  • Ambient humidity <95%, no condensation
  • Airflow > 2 l/min at sensor tip

Product features

  • Small size makes it ideal for dryer installations
  • Measures dew points down to –100 ºC
  • New CS-iTEC sensor technology
  • Version with integrated pressure measurement
  • Various output versions available: 1 x 4…20 mA, 2 x 4…20 mA, RS-485 (Modbus), 4…20 mA loop powered
  • Very fast response time ensures safe and reliable indication whenever dew points are out of valid ranges
  • IP65 casing provides robust protection in rough industrial environment
  • Can be installed directly into dryers through G 1/2” thread
  • High accuracy of 2 ºC dew point
  • M12 connector

Technical data

Measuring range Dew point: -100 … 0 ºC
Temperature: -30 … + 70 ºC
Pressure: -0.1 … 1.6 MPa
Accuracy Dew point: 2 ºC (-20 … -100 ºC )
Temperature: 0.3 ºC
Pressure: 0.05 bar
Pressure range -0.1 … 1.6 MPa
Power supply 12 … 30 VDC / 30 mA
Measured gas Non-corrosive gases
Ambient conditions 0 … 50 ºC
Transport
temperature
-30 … +70 °C
Response time [90%]
(at 4 l/min, perforated cap)
-80 …-20 °C: 20 sec
-20 … -80 °C: 3 min
Output signal 4…20 mA, 3-wire (0699 0220, 0699 0221, 0699 0223)
Modbus / RTU (0699 0222, 0699 0224)
Loop powered 4…20 mA (0699 0025)
Analog output scaling 4 mA –> -100 °C
20 mA –> +20 °C
Connector M12, 5 pole
Wire sizes Connector terminals support 0.14 … 0.25 mm²
Casing Process connection: stainless steel
Casing: Zinc alloy
Classification IP65
Process connection G 1/2” thread (ISO 228/1)
Sensor protection A: stainless steel sinter filter, pore size < 30 um
B: Perforated sensor cap (standard, requires a prefilter 0.1 um)
EMC According to IEC 61326-1

Please leave your enquiry here, we will reply as soon as possible.
Name*  
Company Name  
Product Interested  
Quantity  
Email*  
Contact No.*  
Messages*